How to Apply Kemiko Concrete Stain for a Perfect Finish Every Time

Are you tired of your concrete floors looking dull and uninspiring?

Do you want to add some personality and style to your space without breaking the bank? If so, it’s time to consider applying Kemiko concrete stain. Not only does this product enhance the look of your concrete surfaces, but it also protects them from damage and wear over time. In this article, we will guide you through the process of how to apply Kemiko concrete stain for a perfect finish every time.

First things first: Before you start applying the stain, make sure your concrete surface is clean and dry. Any dirt or debris on the surface can interfere with the adhesion of the stain, resulting in an uneven finish. Use a broom or vacuum to sweep away any loose debris, and then mop the surface with a damp cloth to remove any stuck-on dirt.

Once your concrete surface is clean and dry, it’s time to prepare it for staining. Start by applying a coat of Kemiko’s Concrete Cleaner, which will help remove any stubborn stains or marks from the surface. Allow the cleaner to sit for 30 minutes, then rinse it off with a damp cloth.

Next, you will need to apply a coat of Kemiko’s Concrete Sealer. This product helps create a barrier on the concrete surface that will prevent stains and moisture from seeping into the concrete. Apply the sealer evenly over the entire surface, making sure to cover any cracks or crevices. Allow the sealer to dry completely before moving on to the next step.

Now it’s time to apply the Kemiko concrete stain. There are many different colors and finishes available, so choose the one that best suits your style and taste. Start by applying a small amount of stain to an inconspicuous area of the surface to test the color and finish. If you are happy with the result, proceed to apply the stain evenly over the entire surface. Make sure to work in small sections and use a brush or roller to apply the stain evenly. Allow the stain to dry completely before applying additional coats if necessary.

Once your concrete surface is fully stained and sealed, you can enjoy the new look of your space. Kemiko’s products are designed to withstand heavy foot traffic and spills, so you won’t have to worry about your floors looking dingy or damaged over time.


* Can I apply Kemiko concrete stain to a wet surface?

No, it is important to wait until the surface is completely dry before applying the stain.

* How long does it take for the stain to fully cure?

It typically takes 24-48 hours for the stain to fully cure, but this can vary depending on the product and environmental conditions.


Can I apply Kemiko concrete stain over paint or other coatings?

No, if you have previously painted or stained your concrete surface, you will need to remove the old coating before applying Kemiko’s products.

* How often should I reapply the concrete sealer?

It is recommended to apply a new coat of concrete sealer every 2-3 years, depending on the amount of foot traffic and exposure to moisture.

In conclusion, applying Kemiko concrete stain is an easy and affordable way to enhance the look of your concrete surfaces while also protecting them from damage over time. With these simple steps, you can achieve a perfectly stained and sealed surface that will add personality and style to any space.