If you’re looking to add some height and style to your lowered motorcycle, you’ve come to the right place! In this article, we will guide you through the process of raising your motorcycle step by step. By the end of this article, you’ll have a better understanding of the tools and techniques required to raise your lowered motorcycle and improve its overall performance.

The Benefits of Raising Your Motorcycle

Before we dive into the steps, let’s explore some of the benefits that come with raising your motorcycle:

1. Improved handling: By raising your motorcycle, you increase its ground clearance, which allows for better handling on uneven terrain and during cornering.
2. Enhanced visibility: A higher motorcycle provides a better view of the road ahead, making it easier to spot obstacles and avoid accidents.
3. Increased fuel efficiency: Raised motorcycles typically have less air resistance, which can result in improved fuel efficiency.
4. Improved performance: By reducing the weight of your motorcycle, you can improve its overall performance and acceleration.
5. Customization: Raising your motorcycle opens up new possibilities for customization and personalization.

The Tools You’ll Need to Raise Your Motorcycle

Before we begin, it’s important to gather the necessary tools:

1. Motorcycle jack: A sturdy motorcycle jack is essential for lifting your motorcycle off the ground.
2. Wrench set: A wrench set with a variety of socket sizes will be required to adjust the suspension and other components.
3. Screwdriver set: You’ll need a screwdriver set to remove any bolts or nuts that need to be adjusted.
4. Torque wrench: A torque wrench is necessary for properly tightening bolts and nuts to the recommended specs.
5. Level: A level will help you ensure that your motorcycle is raised evenly on both sides.
6. Bubble level: A bubble level can be used to measure the ground clearance of your motorcycle.
7. Motorcycle manual: Your motorcycle manual will provide valuable information about the recommended suspension settings and other important details.

Step-by-Step Guide to Raising Your Motorcycle

Now that you have all the tools, let’s get started!

1. Choose a lift height: Decide on how much you want to raise your motorcycle. Keep in mind that raising your motorcycle too high can affect handling and stability, so it’s important to choose an appropriate height.
2. Loosen the suspension: Before lifting your motorcycle, loosen the suspension using a wrench set. This will allow for easier adjustments later on.
3. Lift the motorcycle: Place your motorcycle jack under the frame or swingarm of your motorcycle and lift it until it’s off the ground. Make sure to use a level to ensure that your motorcycle is raised evenly on both sides.
4. Adjust the suspension: Once your motorcycle is lifted, adjust the suspension using a wrench set. The recommended settings will vary depending on the make and model of your motorcycle, so consult your manual for guidance.
5. Tighten the bolts and nuts: Once you have adjusted the suspension, tighten all the bolts and nuts to the recommended specs using a torque wrench. Make sure to use a level to ensure that everything is aligned properly.
6. Lower the motorcycle: When you’re satisfied with the suspension settings, slowly lower your motorcycle back down to the ground using the jack.
7. Check the ground clearance: Use a bubble level to check the ground clearance of your motorcycle and make any necessary adjustments.