Are you looking to upgrade your car’s handling and performance?

Installing shifter bushings is an excellent way to do just that!

But with so many options on the market, it can be overwhelming to choose the right ones for your vehicle. In this article, we will guide you through the process of installing Kartboy shifter bushings, including step-by-step instructions and expert tips.

Step 1: Gather Your Tools

Before you begin, make sure you have all the necessary tools on hand. You will need a socket wrench set (typically 8mm, 10mm, and 12mm), a torque wrench, a spring compressor, a pair of pliers, a hammer, and a zip tie.

Step 2: Remove the Shift Knob and Grip

To install Kartboy shifter bushings, you’ll need to remove the shift knob and grip first. This will give you access to the shifter bushing itself. To do this, simply unscrew the bolt that holds the knob in place and slide it off. Then, remove the grip by pulling it straight out of the console.

Step 3: Remove the Old Shift Bushings

Once the knob and grip are removed, you’ll need to take off the old shifter bushings. These can be a bit more difficult to remove than the knob and grip, so use your socket wrench set and pliers to loosen and remove the bolts that hold them in place. Be sure to keep track of the bolts and nuts you remove, as they will need to be reused later.

Step 4: Install the New Shift Bushings

Once the old bushings are removed, it’s time to install the new Kartboy shifter bushings. These bushings are designed to provide a tighter, smoother shift than the stock ones. Start by inserting the bolt that holds the knob in place back into the console, but don’t tighten it yet. Then, slide the new bushings onto the shaft, making sure they fit snugly and securely. Finally, tighten the bolt to the recommended torque specified by Kartboy.

Step 5: Reinstall the Knob and Grip

Once the shifter bushings are installed, it’s time to reattach the knob and grip. Simply slide the knob back onto the bolt and tighten it with your socket wrench set. Then, push the grip back into the console until it clicks securely.

Step 6: Test Out Your New Shifter Bushings

Now that you’ve installed your Kartboy shifter bushings, it’s time to test them out! Take your car for a spin and give the shifter a good tug. You should notice an immediate improvement in the shift quality, as well as a reduction in vibration and noise.

Expert Tip:

When installing shifter bushings, always use the recommended torque specified by Kartboy. This will ensure that the bushings are properly seated and securely fastened to the shaft.

FAQs:

Q: Can I install Kartboy shifter bushings on my own?

A: Yes, with the right tools and knowledge, anyone can install shifter bushings on their own car.

Q: How often should I replace my shifter bushings?

A: Shifter bushings typically last between 30,000 to 50,000 miles, but this can vary depending on the make and model of your car. It’s always a good idea to check them regularly for any signs of wear and tear.